|
The Panel Glide is created from flat fabric panels attached to a simple headrail
system using roller-mounted carriers, which makes it light and easy to operate.
The fabric panels can then be drawn sideways using a cord operating system.
·
Available in 3, 4 or 5 channel tracking systems, giving you 3, 4 or 5 panels!
·
All panels stack neatly behind each other
·
Comprehensive range of standard flat fabrics, and woven wood fabrics.
·
Large areas can be covered easily and cost effectively with panel glide.
·
Our LiteGlide™ tracking system makes pulling large blinds across simple and easy.
top
·
A 3, 4, or 5 channel tracking system can be specified.
·
Eyelets can be fitted into the panels (fabric only) to add an ultra-modern look.
·
Wide bands of braid can be attached to the panels (fabric only) to compliment other
colours in your room.
top
·
A left or right hand control can be specified for this blind.
·
Stacking options can be configured as required, for example, on a 3 channel track
system, all three panels can go back to one side, or two can go to one side and
one panel can go to the other.
top
·
A top fixing bracket is the standard bracket for this blind. A top fixing is the
best fixing for a panel glide. The
recommended screw size is no.8
·
A face fixing bracket is also
available. It is recommended that the intended fixing be strong before attempting
to face fix what can sometimes be a heavy blind.
top
·
Panel glide blinds can only be installed by top fixing.
·
When stacked back, at least one panel’s width of the window space will be covered
by the fabric itself.
top
·
The panel glide blind is ideally suited to any window which
is wider than 2000mm, and has a drop of more than 1800mm.
·
Panel glides are also used as room dividers, and are very
effective with either fabric or woodweave panels.
top
|