|
Also known as a micro-blind,
the horizontally aligned
slats held by polyester ladder braids create the modern tidy look which can only
be acheived with a venetian blind.
The following information is for
venetian blinds with a 15mm wide slat. All blinds are manufactured
with colour co-ordinating cords, head and bottom rails, and a tilt wand mechanisms
for tilting the slats through 180 degrees.
·
Slats can be angled to give total privacy. It is also
possible to give privacy and allow light to come in.
·
Slats set at a certain angle will allow you see out, and stop
people seeing in.
·
Light can be directed around a room to reduce glare in certain
areas. For example, reducing the glare on TV and computer screens.
·
Blinds can be raised up to leave the window space clear and
open.
·
Venetian blinds have a very small stacking depth even over
long drops.
·
Lightweight and suitable for fixing to weaker materials such
as plasterboard.
·
Can be ordered in a gloss or matt finish. A super-matt
finish is also now available, giving a very soft look to even the largest blinds.
·
Venetian blinds can now be fitted into the perfect fit™
frame system for the ultimate unobtrusive look. Particularly suitable for conservatories.
top
·
Hold down clips
o
Plastic hooks which secure the bottom bar in place when attached
to doors or tilt windows.
·
Mixed slat combinations
o
A mixture of colours can be added into one blind.
·
Electronic Tilt Operation
o
The headrail can be manufactured with a battery operated motor
to allow the slats to be tilted by remote control.
top
·
Split
o
Split controls will have the clear tilt wand on the left hand
side, and the pull cords on the right hand side.
·
Reverse
o
Reverse controls will have the clear tilt wand on the right
hand side, and the pull cords on the left hand side.
·
Left
o
Both the pull cords and clear tilt wand will be positioned
on the left hand side of the blind.
·
Right
o
Both the pull cords and clear tilt wand will be positioned
on the right hand side of the blind.
top
·
Standard metal face fix 642425
o
This is the std bracket supplied, suitable for face and top
fixing.
·
Recommended screws are no.6 or no.8
·
Stand-off (16mm) 642414
o
This is similar to the standard bracket, but spaces the blind
off of the fixing face by 16mm.
·
Recommended screws are no.6 or no.8
·
Box Brackets
o
An end fixing clear plastic box bracket is also available,
but not recommended for standard installations.
·
Recommended screws are no.6 or no.8
top
·
Maximum and Minimum Sizes
o
The minimum size for a 15mm venetian blind is 250mm.
The maximum size is 2450mm. Further size limitations can be seen in our downloadable technical
sheet.
·
The widths of blinds are made to a tolerance of 3mm, and the
drops are made to a tolerance of 5mm. Therefore, blinds that are positioned next
to each other may show a slight difference in height even though they have been
ordered at the same drop.
·
Important
notes for bay windows are shown on our downloadable technical sheet.
top
·
Bedroom
·
Lounge
·
Study
·
Conservatory
o
Usually fitted to the Pvc frame of the conservatory, and projected
forward on special brackets to clear the window handles.
·
Kitchen
·
Bathroom
o
Not suitable where the blind is expected
to get wet, or for
excessively steamy rooms where there is no extractor fan. The head
and bottom rails are made of enamelled steel, which in time might develop rust spots if exposed to
excessive moisture.
·
Dining Room
·
Utility Room
top
|